Ram For Mac Pro 2009

Posted on

Mac Pro has a 6-channel memory controller that supports 12 memory slots you can use to install up to 1.5TB of memory using 2933MHz DDR4 ECC compliant memory DIMMs. To ensure compatibility, Apple recommends that you use Apple-approved memory. You can purchase Apple-approved memory online from the Apple Store or by visiting an Apple Retail Store or Apple Authorized Reseller.

MacOSG demonstrates how to install memory in a 2009 Mac Pro. When performing this upgrade, be sure to take precautions for static by discharging static electricity before beginning. Shut down, unplug and place the Mac Pro on a static-free surface. To access the memory, you need to open the side access door by lifting the latch located on the rear of the Mac until it locks in the open position. Remaining possible updates to my Mac Pro include: A newer 480GB SSD ($150–200), a USB 3 PCI card ($60), 32GB RAM ($200), a Blu-ray drive ($66) and possibly an updated video card with 1GB RAM.

A-Tech 8GB Kit (2x4GB) DDR3 1066MHz / 1067MHz SODIMM PC3-8500 RAM for Apple MacBook, MacBook Pro, iMac, Mac Mini (Late 2008, Early/Mid/Late 2009, Mid 2010) 4.7 out of 5 stars 459 $33.99 $ 33. Easily upgrade the memory of your 2009 Apple Mac Pro. We also provide refurbished Macs, SSDs, external storage, docks, and more!

Memory requirements

When you upgrade the memory in your Mac Pro, it must meet these requirements:

  • 2933MHz DDR4 full-length DIMM. Mixing memory speeds is not recommended.
  • Error-correcting code (ECC)
  • 8GB, 16GB, 32GB, 64GB, or 128GB DIMMs
  • Registered (R-DIMM) or Load-Reduced DIMM (LR-DIMM). Do not mix R-DIMMs and LR-DIMMs.
  • 288-pin
  • Use the same size memory modules across all slots to maximize performance.
  • DIMMs with heatsinks are not supported and may damage the DIMM mechanism.
Ram For Mac Pro 2009

The Mac Pro supports both R-DIMMs and LR-DIMMs, but you can't mix these two memory types. Mixing R-DIMMs and LR-DIMMs will result in a memory error flash of the status indicator light when you turn on your computer.

Model specifications

Mac Pro modelMax RAMSpeedType
8-core768GB2666MHz DDR4 ECCLR-DIMM or R-DIMM
12-core768GB2933MHz DDR4 ECCLR-DIMM or R-DIMM
16-core768GB2933MHz DDR4 ECCLR-DIMM or R-DIMM
24-core1.5TB2933MHz DDR4 ECCLR-DIMM or R-DIMM
28-core1.5TB2933MHz DDR4 ECCLR-DIMM or R-DIMM

Configured from Apple, Mac Pro models include the following DIMM types:

  • R-DIMMs for configurations up to 192GB (6x32GB).
  • LR-DIMMs for configurations of 384GB (6x64GB) or more.

All memory included with your Mac Pro is 2933MHz. Mac Pro models with 8 core processors operate memory at 2666MHz.

Ram

Buy Ram For Macbook Pro 2009

Learn more

My fiancé has a 13″ MacBook Pro from 2009. While it probably worked great when it was new, five years later it had become painfully slow (#firstworldproblems) with its 2GB of RAM and 160GB HDD. A few searches online uncovered others who had similar setups and successfully upgraded them to modern performance standards with an SSD and additional RAM.

A Bit of Background

Best Ram For Macbook Pro 2009

When I first used this laptop in 2013 (four years after it was manufactured) it was running OS X Snow Leopard. From a cold boot, it took about 4 minutes to load the OS and stop thrashing the hard drive so you could open a browser or iTunes. This was bad even for the hardware it had, so I tried a few different solutions, including upgrading to OS X Lion, fixing disk permissions, and general hard drive cleanup (defrag, deleting applications and files that were no longer needed, etc.).

Nothing seemed to make a difference, and after an agonizing afternoon slowly upgrading to OS X Mountain Lion, I decided to get serious about fixing the problem. The only “free” option that I really had left was to backup the data, reformat the hard drive, and install a fresh copy of OS X. I decided against that because even the best-case scenario would still be slow compared to the SSD speeds I’m used to on my personal desktop and my company MacBook with an SSD.

The Upgrade

Knowing that others had success with SSD and RAM upgrades in this MacBook model, I decided to pull the trigger on new hardware. After browsing a few discussions on Apple’s support site and reading some reviews, I ordered a Crucial M500 240GB SSD because others reported good compatibility with the specific nVidia chipset (MCP79) in this 2009 MacBook Pro 13″. I also picked up a Crucial 2x4GB DDR3 1066 Mac memory kit.

For the installation process, there are plenty of blogs and tutorials so I won’t go into full details here. I would like to emphasize that you should get a Phillips #00 screwdriver and a Torx T6 screwdriver if you don’t already have them. These are the steps I followed (make sure you avoid static discharge when handling the computer internals):

Mac Pro 2009 Specs

  1. Backup any files that you want to keep from the old hard drive. I used an external USB drive and Time Machine to create a backup.
  2. Create a bootable USB installation drive. I used createinstallmedia and a 16GB USB flash drive.
  3. Shut down the MacBook. Don’t just put it to sleep; it must be shut down.
  4. Use the Phillips #00 screwdriver to remove the 10 screws on the bottom of the MacBook. Keep track of where they go because three of them are longer than the others. I set them down in the same pattern they are installed in the MacBook.
  5. Take off the bottom cover and use the Torx T6 screwdriver to loosen the two black screws in the black arm/hinge that holds down the hard drive.
  6. Remove the black arm, then use the pull tab to carefully lift out the hard drive.
  7. Unplug the SATA and power cable from the hard drive, then remove the four screws in the sides of the hard drive with the Torx T6 screwdriver.
  8. Put those four screws on the new SSD and stick the plastic pull tab on it.
  9. Connect the SATA and power cable to the new SSD, and carefully place it where the old hard drive was located.
  10. Reattach the black arm and tighten down the two screws to hold the SSD in place.
  11. For the RAM upgrade, follow Apple’s instructions.
  12. Reattach the bottom panel and screws.
  13. Press the power button and wait a few minutes for it to boot up.
  14. Format the SSD as a startup drive.
  15. Attach the bootable USB installer and restart the MacBook while holding down the Option key.
  16. Select the USB drive to boot from and follow instructions to install OS X.
  17. Boot into OS X and transfer your data from the backup. I simply dragged and dropped files from the Time Machine backup because I didn’t need to keep any apps from the previous installation.

Ram For Macbook Pro 2010

The Results

The MacBook Pro now feels like a brand new machine. I’m getting a 3 Gigabit link speed instead of 1.5 in the System Report, and I can boot it and launch a browser in less than a minute. Applications open in a few seconds or less instead of taking up to a minute to open.

I highly recommend an SSD upgrade over a new MacBook Pro if yours is less than 5 years old and you don’t need the latest hardware features like a Retina display or Airplay mirroring. With RAM being relatively inexpensive, it makes a nice upgrade too, especially if you find yourself multitasking a lot.

Ram For Mac Pro 2019

For about $200 and a few hours of work, my fiancé has a MacBook Pro that performs her daily computing tasks as well as a $1,000+ brand new model.