Router For Mac Computer

Posted on

This article is for network administrators and other people who manage their own network. If you're trying to join a Wi-Fi network, one of these articles should help:

Once you know the IP Address of Router, you will be able to Login to your Router and make changes as required. You will find below the steps to Login to Router on Mac. Login to Router on Mac. Most people want to login to Route, in order to change Router Security Settings, Update Router Software or to setup Parental controls. Get your Mac router up to full speed. Finding the best wireless router for Mac can help make your computer more productive, without a doubt. But if you want to get the most out of your Apple WiFi router, you also need to consider the potential modem location, analyze your WiFi coverage and performance, decide on the best access points,. The R8000 is a tri-band router, so it can transmit Wi-Fi on the 2.4GHz band, and two separate 5GHz bands, adding up to a total speed of 3200Mb/s, which should be more than enough even for busy.

WiFi Router Password – Router Master is the topmost and popular app with more than 1,000,000+ installations with 3.9 / 5.0 star average rating on Google playstore. It is available to download for FREE on mobile platforms. Whereas, for the Desktop platform, the app is not developed. Officially there is no way we can install this app on PC. With the IP address in hand, you can set up your router: Open your Web browser and type your router’s IP address into the address bar. So, for most SMC routers, you type in your browser’s address bar to access the router’s Web page.

  • Mac: Connect to Wi-Fi and resolve Wi-Fi issues.
  • iPhone, iPad or iPod touch: Connect to Wi-Fi and resolve Wi-Fi issues.

Before changing the settings on your router

  1. Back up your router's settings, just in case you need to restore the settings again later.
  2. Update the software on your devices. This is critical for ensuring your devices have the latest security updates and work the best they can with each other.
    • First, install the latest firmware updates for your router.
    • Then, update the software on your other devices, such as on your Mac and on your iPhone or iPad.
  3. On each device that had previously joined the network, you may need to forget the network to ensure the device uses the router's new settings when rejoining the network.

Router settings

To ensure that your devices can reliably reconnect to your network, apply these settings consistently to each Wi-Fi router and access point, and to each band of a dual-band, tri-band or other multi-band router.

Network name (SSID)

A single, unique name (case sensitive)

The Wi-Fi network name, or service set identifier (SSID), is the name your network uses to advertise its presence to other devices. It's also the name that nearby users will see on their device's list of available networks.

Use a name that's unique to your network, and make sure all routers on your network use the same name for every band they support. For example, don't use common names or default names, such as linksys, netgear, dlink, wireless or 2wire, and don't give your 2.4 GHz and 5 GHz bands different names.

If you don't follow this guidance, your devices may not connect reliably to your network, to all of the routers on your network or to all of the available bands of your routers. And devices that join your network are more likely to encounter other networks that have the same name, and then automatically try to connect to them.

Hidden network


A router can be configured to hide its network name, or SSID. Your router may incorrectly use 'closed' to mean hidden, and 'broadcast' to mean not hidden.

Hiding the network name doesn't conceal the network from being detected or secure it against unauthorised access. And because of the way devices search for and connect to Wi-Fi networks, using a hidden network may expose information that can be used to identify you and the hidden networks you use, such as your home network. When connected to a hidden network, your device may display a privacy warning due to this privacy risk.

To secure access to your network, use the appropriate security setting instead.


WPA3 Personal for better security, or WPA2/WPA3 Transitional for compatibility with older devices

The security setting defines the type of authentication and encryption used by your router, and the level of privacy protection for data transmitted over its network. Whichever level of security you choose, always set a strong password to join the network.

  • WPA3 Personal is the newest, most secure protocol currently available for Wi-Fi devices. It works with all devices that support Wi-Fi 6 (802.11ax), and some older devices too.
  • WPA2/WPA3 Transitional is a mixed mode that uses WPA3 Personal with devices that support that protocol, while allowing older devices to use WPA2 Personal (AES) instead.
  • WPA2 Personal (AES) is appropriate when you can't use one of the more secure modes. In that case, also choose AES as the encryption or cipher type, if available.

Settings that turn off security, such as None, Open or Unsecured, are strongly discouraged. Turning off security disables authentication and encryption and allows anyone to join your network, access its shared resources (including printers, computers and smart devices), use your Internet connection, and monitor data transmitted over your network or Internet connection (including the websites you visit). This is a risk even if security has been turned off temporarily or for a guest network.

Don't create or join networks that use older, deprecated security protocols such as WPA/WPA2 Mixed Mode, WPA Personal, TKIP, Dynamic WEP (WEP with 802.1X), WEP Transitional Security Network, WEP Open or WEP Shared. These are no longer secure, and they reduce network reliability and performance. Apple devices display a security warning when joining such networks.

MAC address filtering, authentication and access control


When this feature is enabled, your router can be set up to only allow devices that have specified media access control (MAC) addresses to join the network. Reasons why you shouldn't rely on this feature to prevent unauthorised access to your network:

  • It doesn't prevent network observers from monitoring or intercepting traffic on the network.
  • MAC addresses can easily be copied, spoofed (impersonated) or changed.
  • To help protect user privacy, some Apple devices use a different MAC address for each Wi-Fi network.

To secure access to your network, use the appropriate security setting instead.

Automatic firmware updates


If possible, set your router to install software and firmware updates automatically as they become available. Firmware updates can affect the security settings available to you, and they deliver other important improvements to the stability, performance and security of your router.

Radio mode

All (preferred),or Wi-Fi 2 through Wi-Fi 6 (802.11a/g/n/ac/ax)

These settings, available separately for the 2.4 GHz and 5 GHz bands, control which versions of the Wi-Fi standard the router uses for wireless communication. Newer versions offer better performance and can support more devices concurrently.

It's usually best to enable every mode that's offered by your router, rather than a subset of these modes. All devices, including older devices, can then connect using the fastest radio mode they support. This also helps reduce interference from nearby legacy networks and devices.


Enable all bands that are supported by your router

A Wi-Fi band is like a road that data can flow down. More bands provide more data capacity and performance for your network.



Each band of your router is divided into multiple, independent communication channels, like different lanes on a road. When channel selection is set to automatic, your router will select the best Wi-Fi channel for you.

If your router doesn't support automatic channel selection, choose whichever channel performs best in your network environment. That varies depending on the Wi-Fi interference in your network environment, which can include interference from any other routers and devices that are using the same channel. If you have multiple routers, configure each one to use a different channel, especially if they are close to each other.

Channel width

20 MHz for the 2.4 GHz band
Auto orall widths (20 MHz, 40 MHz and 80 MHz) for the 5 GHz band

Channel width specifies the size of 'pipe' available to transfer data. Wider channels are faster but more susceptible to interference, and also more likely to interfere with other devices.

  • 20 MHz for the 2.4 GHz band helps to avoid performance and reliability issues, especially near other Wi-Fi networks and 2.4 GHz devices, including Bluetooth devices.
  • Auto or all channel widths for the 5 GHz band ensures the best performance and compatibility with all devices. Wireless interference is less of a concern in the 5 GHz band.


Enabled, if your router is the only DHCP server on the network

Dynamic host configuration protocol (DHCP) assigns IP addresses to devices on your network. Each IP address identifies a device on the network and enables it to communicate with other devices on the network and Internet. A network device needs an IP address, much like a phone needs a phone number.

Your network should only have one DHCP server. If DHCP is enabled on more than one device (such as on both your cable modem and router), address conflicts may prevent some devices from connecting to the Internet or using network resources.

DHCP lease time

8 hours for home or office networks; 1 hour for hotspots or guest networks

DHCP lease time is the length of time that an IP address assigned to a device is reserved for that device.

Wi-Fi routers usually have a limited number of IP addresses they can assign to devices on the network. If that number is depleted, the router can't assign IP addresses to new devices, and these devices can't communicate with other devices on the network and Internet. Reducing DHCP lease time allows the router to reclaim and reassign old IP addresses that are no longer being used faster.


Best router for mac

Enabled, if your router is the only device providing NAT on the network

Network address translation (NAT) translates between addresses on the Internet and addresses on your network. NAT can be understood by imagining a company's post room, where deliveries to employees at the company's address are directed to employee offices within the building.

You should generally only enable NAT on your router. If NAT is enabled on more than one device (such as on both your cable modem and router), the resulting ”double NAT” may cause devices to lose access to certain resources on the network or Internet.



WMM (Wi-Fi multimedia) prioritises network traffic to improve the performance of a variety of network applications, such as video and voice. All routers that support Wi-Fi 4 (802.11n) or later should have WMM enabled by default. Disabling WMM can affect the performance and reliability of devices on the network.

Device features that can affect Wi-Fi connections

These features may affect how you set up your router or the devices that connect to it.

Private Wi-Fi Address

If you're connecting to a Wi-Fi network from an iPhone, iPad, iPod touch or Apple Watch, find out more about using private Wi-Fi addresses in iOS 14, iPadOS 14 and watchOS 7.

Location Services

Make sure your device has Location Services turned on for Wi-Fi networking, because regulations in each country or region define the Wi-Fi channels and wireless signal strength allowed there. Location Services helps to ensure your device can reliably see and connect to nearby devices, and that it performs well when using Wi-Fi or features that rely on Wi-Fi, such as AirPlay or AirDrop.

On your Mac:

  1. Choose Apple menu  > System Preferences, then click Security & Privacy.
  2. Click the lock in the corner of the window, then enter your administrator password.
  3. In the Privacy tab, select Location Services, then select Enable Location Services.
  4. Scroll to the bottom of the list of apps and services, then click the Details button next to System Services.
  5. Select Wi-Fi Networking, then click Done.

On your iPhone, iPad or iPod touch:

Wireless Router For Mac

  1. Go to Settings > Privacy > Location Services.
  2. Turn on Location Services.
  3. Scroll to the bottom of the list, then tap System Services.
  4. Turn on Networking & Wireless (or Wi-Fi Networking).

Best Router For Mac Computers

Auto-Join when used with wireless carrier Wi-Fi networks

Wireless carrier Wi-Fi networks are public networks set up by your wireless carrier and their partners. Your iPhone or other Apple mobile device treats them as known networks and connects to them automatically.

If you see a ”Privacy Warning” under the name of your carrier's network in Wi-Fi settings, your mobile identity could be exposed if your device were to join a malicious hotspot impersonating your carrier's Wi-Fi network. To avoid this possibility, you can prevent your iPhone or iPad from automatically rejoining your carrier's Wi-Fi network:

Best Gigabit Speed Routers For Mac

  1. Go to Settings > Wi-Fi.
  2. Tap next to the wireless carrier's network.
  3. Turn off Auto-Join.

Use Wi-Fi

Learn how to connect to an open, secure, or hidden Wi-Fi network. You can also create a new Wi-Fi network.

Connect to a Wi-Fi network

Click in the menu bar, then choose a network. If Wi-Fi is off, click , then select Turn Wi-Fi On.*

If you connect to a public Wi-Fi network, a window might appear with terms and conditions you're asked to agree to before you can connect.

Connect to a secure Wi-Fi network

Secure Wi-Fi networks are password-protected and have by their names.

  1. Click in the menu bar. If Wi-Fi is off, click , then choose Turn Wi-Fi On.*
  2. Choose a network.
  3. Enter the password, then click Join. If you don't know the password to the Wi-Fi network, contact the network administrator.

Connect to a hidden network

  1. Click in the menu bar. If Wi-Fi is off, choose , then choose Turn Wi-Fi On.*
  2. Choose Join Other Network.
  3. Enter the network name. Make sure you enter the network name correctly.
  4. If the network is secure, choose the Security type, then enter the password.
  5. Click Join.

Learn what to do if you can't connect to a hidden network.

Create a Wi-Fi network

If you have Internet service at your location, you can connect an AirPort base station or a third-party router to your modem to create a Wi-Fi network. Use the setup guide for your AirPort base station, or check your third-party router's manual for help.

* If you don't see the Wi-Fi icon in the menu bar, you can add it back. Choose Apple () menu > System Preferences, click Network, click Wi-Fi, then select 'Show Wi-Fi status in menu bar'.

Use Personal Hotspot

With most carrier plans, you can share the cellular data connection of your iPhone or iPad (Wi-Fi + Cellular) with your Mac.

Learn how to set up Personal Hotspot.

Use Ethernet

To connect to the Internet over a wired connection, connect an Ethernet cable between your router or modem and the Ethernet port on your Mac.

Some Macs require an Ethernet adapter like the Belkin USB-C to Gigabit Ethernet Adapter, or the Apple Thunderbolt to Gigabit Ethernet Adapter.

Learn more

Router For Mac Computer

  • Use recommended settings for Wi-Fi routers and access points.